The rotary cut-off eliminates chips, scrap and the need for washing parts. Compared to sawing, it is fast, quiet, and a far more accurate high volume method for cutting tubes to length. The material savings can also be significant, because the rotary blade doesn’t remove tube material like a saw does. Minimum ID reduction is of vital importance for secondary operations such as mandrel bending. With the T-Drill automatic cut-off machines you achieve exceptional quality and a production speed superior to any other method.

The TCC-25 is an automated tube cutting station offering cut capacity up to the OD of 1” (25 mm). With a minimum cut length of 2” (50 mm) the station uses the “Pull-Apart” method and with shorter cut lengths it cuts straight through.

The settings for lengths and quantities are set from an easy –to-use touch screen panel. The screen also offers important information for service purposes, such as I/O indicators and failure diagnostics on clear text.

The TCC-25 is the perfect solution when cutting smaller diameter tubing. It enables a truly fast set-up of approximately 3-5 minutes and an unbeatable production rate especially with straight length cutting.

Typical Applications Include:

• Heat exchanger applications
• Air conditioning
• Heating
• Refrigeration
• Solar technology
• Automotive fuel and brake lines